• Posted by OQSG Admin
• 14 February 2012
• News

OQSG has begun developing its course library for ASME’s Pipeline Personnel Qualification B31Q Standard. Thus far, OQSG has completed the following B31Q courses:
• 0031: Inspect and Monitor Galvanic Ground Beds/Anodes
• 0721: Joining of Pipe—Threaded Joints
• 1081: Tapping a Pipeline (Tap Diameter 2 inches and Less)
• 1291: Locate Underground Pipelines
• 1301: Install and Maintain Pipeline Markers

OQSG is building the B31Q courses as our customers request them, so contact us if your company needs any B31Q tasks. Also, we are always looking for new subject matter experts (SMEs) who would like to contribute to the development of our courses. Please contact us if you are interested in collaborating with OQSG as an SME.

OQSG has specialized in delivering safety training solutions to pipeline and industrial operators for over a decade. The company uses its own program, OQVerify, to provide computer-based training and assessments. OQSG also offers solutions for completing Skills Qualifications and certifying Skills Evaluators. For more information about OQSG and its services, call 1-337-769-9608 or visit www.oqsg.com.

• Posted by OQSG Admin
• 14 October 2011
• News

OQSG has released a new and improved version of Covered Task 15: Place and Maintain Line Markers. This updated version of the course includes more thorough training on locating a pipeline both manually and electronically.

OQSG decided to make these changes to the CT15 after researching and building a different course on locating a pipeline. With all the information acquired for the line locating course, the course development team determined that adding it to CT15 would greatly enhance the quality of the existing course. If you or your company would like to give feedback regarding this Covered Task or any other OQSG Covered Tasks, please do not hesitate to contact us.

OQSG has specialized in delivering safety training solutions to pipeline and industrial operators for over a decade. The company uses its own program, OQVerify, to provide computer-based training and assessments. OQSG also offers solutions for completing Skills Qualifications and certifying Skills Evaluators. For more information about OQSG and its services, call 1-337-769-9608 or visit www.oqsg.com.

• Posted by OQSG Admin
• 04 October 2011
• News

Covered Task 44: Tubing and Tube Fitting, Handling, and Installation is a new course that is now available to users. This course was specially developed to satisfy the requirements of the most current DOT regulations.

Covered Task 44 was developed at the request of several operators who need training and assessments that focus specifically on tubing. In addition to meeting DOT standards, this course was also created to align with B31Q requirements that deal with compression couplings and tubing/fitting installations. OQSG would like to extend its gratitude to Gary Williams of Meitec for providing his subject matter expertise on this topic.

OQSG has specialized in delivering safety training solutions to pipeline and industrial operators for over a decade. The company uses its own program, OQVerify®, to provide computer-based training and assessments. OQSG also offers solutions for completing Skills Qualifications and certifying Skills Evaluators.

• Posted by OQSG Admin
• 04 October 2011
• News

Covered Task 62: Inspecting and Remediating Pipeline Hazard Protection has been released and is available to users. This new course was specially developed to satisfy the requirements of the most current DOT regulations.

Covered Task 62 is comprised of three subtasks which cover the following topics: types of pipeline hazards, protective physical barriers, and responding to abnormal operating conditions. OQSG developed the course at the request of Kinder Morgan who needed training and assessments that focus specifically on pipeline hazard protection.

OQSG has specialized in delivering safety training solutions to pipeline and industrial operators for over a decade. The company uses its own program, OQVerify®, to provide computer-based training and assessments. OQSG also offers solutions for completing Skills Qualifications and certifying Skills Evaluators.

• Posted by Blake Doré
• 11 August 2011
• News

Starting now, OQSG’s HSE “Step Back for Safety” courses are available in OQVerify®. OQVerify® provides simple and user-friendly computer based training, knowledge assessments, and skills assessments.

These HSE (Heath Safety and Environment) courses cover topics that apply to a wide range of OSHA regulations and fulfill a number of ISNetworld RAVS requirements.  After courses are completed, the records will be uploaded to ISNetworld or any other third party record keeping system.

Read more

• Posted by Blake Doré
• 10 August 2011
• News

OQSG has made its Pipeline Safety Orientation (PSO) courses available in OQVerify®. OQVerify® provides simple and user-friendly computer based training, knowledge assessments, and skills assessments.

The PSO courses present operators with training that satisfies the requirements of the Review and Verification Services (RAVS). The PSO library includes 31 awareness level HSE courses that are divided into five sections, and courses are offered in English and Spanish. Following course completion, records will be uploaded to ISNetworld or any other third party record keeping system.

Read more

• Posted by Blake Doré
• 29 July 2011
• News

OQSG is pleased to announce the release of its Fatigue Management Series. The fatigue Management Series is comprised of five courses that are specifically constructed to meet the requirements of the “Fatigue Management” section of PHMSA’s regulations for control room management.

The Fatigue Management Series has been designed to meet three levels of training: Awareness level, affected person, and supervisory level training. These courses cover the entire scope of fatigue management, with training that includes the implementation and maintenance of a fatigue management program. Following course completion, records will be uploaded to ISNetworld or any other third party record keeping system.
Read more

• Posted by Blake Doré
• 06 April 2011
• News

OQSG has updated CT36 (Performing General Pipeline Repair Activities) to include new information. This Covered Task now includes an objective on installing completion plugs. The addition to the course has been finalized, and it can be assigned through OQVerify.

The decision to update our course to include information on installing completion plugs came as a result of a request by the operator Nustar. Nustar requires that this subject be covered for qualification. If your company would like to give feedback or make suggestions on this Covered Task or any other OQSG Covered Tasks, we encourage you to contact us.

• Posted by Blake Doré
• 18 August 2010
• News

Individuals needing to complete Proctor training and certification can now complete the course and assessment online through Emprowise. Before, Proctor training was administered through a weekly phone and computer conference. The online Proctor Training course allows an individual to schedule and complete the course and assessment at their own convenience.

The OQSG Proctor Training course explains the expectations for acting as a proctor and ensuring valid assessments. An assessment will follow the course and test individuals on the information provided in the course. This will determine if the individual fully understands the responsibilities of a Proctor. Both the Proctor Training course and assessment must be completed. Contact us at 337-769-9608 to schedule the Proctor Training course.

• Posted by Blake Doré
• 17 July 2010
• News

OQSG is now offering Partial Skills Assessments in OQVerify. This means companies can schedule separate components of a Skills Assessment that are more job-specific to an employee’s position. By scheduling only certain assessments, individuals can complete assessments that pertain to his/her covered task.

OQSG is constantly reviewing and working with its safety training services in an effort to ensure customer satisfaction and convenience. In the past, operators and contractors were only allowed to schedule entire Skills Assessments. For example, an individual completing CT15 (Place and Maintain Line Markers) was required to complete all sections of CT15. This includes 15.2 (Locate Pipeline), CT15.3 (Install Line Markers), and CT15.4 (Inspect and Maintain Line Markers). Now, if an operator feels as though an individual need only complete assessments on Locating Pipelines and Installing Line Markers, he can schedule only CT15.2 and CT 15.3.